Panic Bar / Exit Device Installation in Los Gatos: how it works
Panic Bar / Exit Device Installation in Los Gatos: here is what the job involves and how to book it.
Exit devices, the push bars and crash bars on exit doors, let a crowd leave with one motion and no key. We install and repair rim, vertical-rod and mortise exit devices, fire exit hardware on rated doors, outside trim so staff can get back in, and alarmed or electrified versions where the door needs to be monitored or tied to access control. Getting the device type and the door rating to match is the part people get wrong.
The technician comes to your address in Los Gatos, in Silicon Valley. The dispatch line at (888) 492-0666 is answered around the clock, and the dispatcher confirms the details and an ETA before anyone is sent.
What's included in Los Gatos
- Confirmation of what the opening needs: single or pair of doors, fire-rated or not, inward or outward swing, and whether it is on a required exit path
- Device type matched to the door: rim for single doors, surface or concealed vertical rod for pairs, mortise where the door is prepped for it
- Outside trim as needed: lever, pull with keyed cylinder, or a cylinder for dogging on non-rated doors
- Fire exit hardware with matching labels on rated doors, with no dogging feature
- Alarmed devices for doors that staff keep propping, and electrified latch retraction or trim when the device must work with access control
- Strike alignment and closer check so the latch catches every time, then a test of the device under a light push
What to have ready
- Authorization from the business owner or property manager; an inspection notice or fire marshal correction, if that is what prompted the call
- Photos of the door from both sides, the top edge label (fire rating, if any), and the frame
- Whether it is a single door or a pair, and whether the pair has a center mullion
- How staff need to get in from outside, if at all (lever, key, card reader, or never)
- Any need for an alarm on the exit, or to tie it into an existing access-control system
Time on site and limits
Typically 60-120 minutes per door for a rim device on a door already prepped for one, including outside trim and strike. Vertical-rod devices, pairs of doors, removable mullions, alarmed or electrified devices, and doors that need fresh prep extend that, and we schedule those as half-day jobs.
- Whether a door legally requires panic hardware is set by occupancy type and occupant load under the building and fire codes; the fire marshal or building inspector makes that call, and we install to it
- Fire-rated doors require fire exit hardware with a listing that matches the door and frame; panic hardware with a dogging feature is not permitted on them, and field prep on the door is limited
- A required exit door cannot carry a deadbolt, chain, slide bolt or any second lock. If your exit door has one, it must come off when the device goes on
- Pairs of doors with vertical rods depend on floor and header strikes; uneven floors, worn thresholds and sagging doors need correcting first or the rods will not latch
- Electrified devices depend on the access-control system and the power available at the door; those are quoted after we see the wiring
Pricing for panic bar / exit device installation
Device type (rim, vertical rod, mortise), fire-rated versus standard, outside trim, alarm or electrified options, single door versus pair, and whether the door needs new prep set the price. A code-driven replacement of an incorrect device on a rated door is quoted after we see the labels.
The dispatcher gives you a range on the phone, and the technician confirms a written quote before any work starts.
Payment is by Cash, Credit Card, Debit Card, Apple Pay and Google Pay, and you receive an itemized receipt listing what was done.
Hardware
- Von Duprin 98/99 and 33A/35A series
- Sargent 80 series
- Detex Advantex 10 series and Detex alarmed exits
- Precision (Stanley) Apex 2000 series
- Adams Rite 8000 series for narrow-stile aluminum doors
- Falcon 25 and Dorma 9000 series
- Rim, surface vertical rod, concealed vertical rod and mortise types
- UL 305 panic and UL 10C fire exit hardware listings
Local notes for Los Gatos
Los Gatos is a town at the base of the Santa Cruz Mountains just southwest of San Jose, bordered by San Jose, Campbell, Saratoga and Monte Sereno. The historic downtown along North Santa Cruz Avenue and Main Street keeps Victorian-era homes and commercial buildings, while Los Gatos Boulevard east of CA-17 is a more suburban strip with shopping centers at major intersections; Vasona Lake County Park sits near the middle of town and Netflix is headquartered here. The town was mostly built out by the 1980s, and its terrain ranges from level land to steep, densely wooded hillsides. CA-17 bisects the town north-south and CA-85 roughly marks its northern edge.
Getting to you: CA-17 runs through the center of town toward Santa Cruz and CA-85 marks the northern edge; downtown is pedestrian-oriented with historic buildings and small blocks, and hillside neighborhoods sit on steep, wooded terrain above the valley floor.
ZIP codes served: 95030, 95031, 95032, 95033. Addresses just over the line in Campbell, Saratoga and Monte Sereno are dispatched the same way.
Reach the dispatcher at (888) 492-0666
For panic bar / exit device installation in Los Gatos, tell the dispatcher your address and what is wrong. You get an ETA before anyone is sent, a written quote before any work starts and a receipt when it is done. The line is answered around the clock.
One & Only Locksmith is bonded and insured; a certificate of insurance is available on request.
