Lock Rekeying in Sun Valley: how it works
Lock Rekeying in Sun Valley: here is what the job involves and how to book it.
Rekeying changes the pin stack inside your existing cylinder so a brand-new key operates it and every old key stops working. The lock body, trim and finish stay in place. It is the right move when the hardware is sound but you no longer know who has a copy of the key.
The technician comes to your address in Sun Valley, in the San Fernando Valley. The dispatch line at (888) 492-0666 is answered around the clock, and the dispatcher confirms the details and an ETA before anyone is sent.
What's included in Sun Valley
- Removal of each cylinder from its deadbolt, knob or handleset
- Replacement of the bottom pins with a new combination and reassembly of the plug
- New keys cut to the fresh combination and tested in every rekeyed lock
- Keying compatible locks alike so one key runs the front, back, side and garage doors
- Cleaning and lubrication of the cylinder while it is apart
- Reinstallation and a check of key action, bolt throw and latch engagement
What to have ready
- Proof you own or rent the home (ID with the address, closing documents or lease); renters also need the owner's or manager's approval
- A count of every lock you want on the new key, including gates, garage side doors and the ADU
- The brand stamped on the key or lock face if you know it (Kwikset, Schlage, Baldwin and so on)
- How many keys you want cut for the household
- One working key for each lock if you have it; it speeds the job but is not required
Time on site and limits
Typically 45-90 minutes for a home with three to five keyed doors. Mixed brands that need cylinder swaps to key alike, seized or corroded cylinders, SmartKey locks that need a reset tool, and large key orders extend the visit.
- Locks with different keyways cannot share one key; a Kwikset KW1 and a Schlage SC1 keyway, for example, need a cylinder change on one side to be keyed alike
- Worn, cracked or corroded cylinders are replaced rather than rekeyed because fresh pins will not fix a plug that is out of tolerance
- Restricted and high-security keyways (Medeco, Mul-T-Lock, Primus) require manufacturer authorization and the correct pins; we confirm by phone whether we can service yours
- Rentals and HOA-managed units need written approval from the owner or manager before we change keys
- Rekeying a master-keyed cylinder removes it from the master system unless we are asked to re-pin it to the chart
Pricing for lock rekeying
Pricing is driven by the number of cylinders, whether any need to be swapped to make a keyed-alike set, the lock brand and keyway (standard versus SmartKey or restricted), the number of keys cut, and the time of day. The quote covers labor, pins and keys, and is written before we start.
The dispatcher gives you a range on the phone, and the technician confirms a written quote before any work starts.
Payment is by Cash, Credit Card, Debit Card, Apple Pay and Google Pay, and you receive an itemized receipt listing what was done.
Hardware
- Kwikset KW1 and KW10 keyways, including SmartKey cylinders (reset rather than re-pinned)
- Schlage SC1 and SC4 keyways, including Everest C123 restricted-blank cylinders
- Weiser WR5, Baldwin, Emtek and Yale residential cylinders
- Defiant, Brinks and other hardware-store brands on the KW1 keyway
- Mortise cylinders on older homes and deadbolts with removable cores
Coverage in Sun Valley
Sun Valley is served as part of greater Los Angeles. ZIP codes covered: 91352. Addresses just over the line in North Hollywood, Burbank and Pacoima are dispatched the same way. Give the dispatcher the cross street if the address is hard to find.
Call (888) 492-0666
For lock rekeying in Sun Valley, tell the dispatcher your address and what is wrong. You get an ETA before anyone is sent, a written quote before any work starts and a receipt when it is done. The line is answered around the clock.
One & Only Locksmith is bonded and insured; a certificate of insurance is available on request.
