Safe Installation & Repair in Mountain View, CA.

This page covers safe installation & repair in Mountain View, from what is included to what to have ready.

Safes need a specialist for three different jobs: putting them in correctly so they cannot be carried off, getting them open when the combination or key is gone, and keeping the lock and bolt work healthy. We anchor depository, burglary-rated, fire-rated and gun safes, change combinations, replace mechanical and electronic locks, and open locked-out safes with the least damage the situation allows. Manipulation first, drilling only when it is the honest path.

The technician comes to your address in Mountain View, in Silicon Valley. The dispatch line at (888) 492-0666 is answered around the clock, and the dispatcher confirms the details and an ETA before anyone is sent.

• Placement and anchoring: locating a solid floor, drilling and setting anchors into the slab, or bolting to a plate where the floor is wood
• Combination changes on mechanical dials and electronic keypads after a change of ownership, staff turnover or a lost code
• Lockouts: dial manipulation where the lock allows it, or a precise drill point followed by a hardened repair plug and a new lock
• Lock replacement: mechanical to electronic conversions, dead keypads, worn wheel packs, and relockers that have fired
• Bolt work, handle and hinge repair, and door realignment on safes that have been moved or dropped
• Depository slot, hopper and interior locker service on commercial drop safes

• Proof the safe is yours: a receipt, the serial number, a photo of the manufacturer plate, or estate or business documents for an inherited or acquired safe
• Authorization from the business owner or manager for a safe on commercial premises
• The make and model and, for a lockout, what the safe did last: dial spinning free, keypad beeping, battery changed, bolts not retracting
• Clear access to the safe and to the floor around it for an anchoring job
• Whether the safe will stay where it is or needs moving, and roughly how heavy it is

Typically 30-45 minutes for a combination change, 60-120 minutes to anchor a safe to a concrete floor, and 60-180 minutes for a lockout opening on a standard commercial safe. Burglary-rated safes with hard plate and relockers, electronic locks in lockout mode, and government-class containers take considerably longer and are quoted after we know the model.

• Not every safe opens non-destructively. Group 2 mechanical locks can often be manipulated; electronic locks and Group 1 manipulation-resistant dials usually mean drilling, and safes with glass relockers need the drill point chosen with care. We repair the hole afterward
• Drilling a rated safe may affect its UL burglary listing or manufacturer warranty even after repair; we explain that before the first hole
• Government security containers (Kaba Mas X-10 and similar) and some manufacturers' high-end locks require factory or certified service; we will tell you when that is the case
• Manufacturers do not release combinations over the phone, and neither do we. Proof of ownership comes first
• Moving a heavy safe up stairs or across finished floors is rigging work; we anchor and service in place and can arrange movers when needed

Job type (combination change, anchoring, opening, lock replacement), the safe's rating and lock type, how much repair follows an opening, and parts such as a new lock or keypad set the price. Lockout openings are quoted as a range after we identify the lock, since manipulation and drilling are different amounts of work.

The dispatcher gives you a range on the phone, and the technician confirms a written quote before any work starts.

Payment is by Cash, Credit Card, Debit Card, Apple Pay and Google Pay, and you receive an itemized receipt listing what was done.

• S&G 6730 and LaGard 3330 Group 2 mechanical dials
• S&G 8500 Group 1 manipulation-resistant dials
• S&G 6120 / 6128, LaGard Basic and LG33E electronic locks
• SecuRam and Kaba Mas electronic locks
• AMSEC, Gardall, Hollon and Mesa depository and B-rate safes
• TL-15 and TL-30 burglary-rated safes
• UL 72 Class 350 fire-rated safes
• Liberty, Fort Knox and Browning gun safes

Mountain View sits on the southern shore of San Francisco Bay in Santa Clara County, between Palo Alto, Los Altos and Sunnyvale. Castro Street forms a walkable seven-block downtown between the Caltrain and VTA transit center and El Camino Real, while north of US-101, North Bayshore holds the Googleplex, Shoreline Amphitheatre and Shoreline Park, with Shoreline Boulevard its busiest access road; East Whisman, on the east side, is a low-rise office and light-industrial area now planned for mixed use. Neighborhoods include 1950s and 1960s ranch homes on former orchards, Eichlers in Monta Loma and Spanish-style homes in Cuernavaca. US-101, CA-85, CA-237 and Central Expressway serve the city.

Getting to you: US-101 separates North Bayshore from the rest of the city, with Shoreline Boulevard the busiest of three access roads; CA-85, CA-237 and Central Expressway (County Route G6) cross the city. Caltrain and VTA light rail meet at the downtown transit center at the end of Castro Street.

ZIP codes served: 94035, 94039, 94040, 94041, 94042, 94043. Addresses just over the line in Sunnyvale, Los Altos and Palo Alto are dispatched the same way.

For safe installation & repair in Mountain View, tell the dispatcher your address and what is wrong. You get an ETA before anyone is sent, a written quote before any work starts and a receipt when it is done. The line is answered around the clock.

One & Only Locksmith is bonded and insured; a certificate of insurance is available on request.