Break-In & Burglary Damage Repair in San Martin, CA.

If you need break-in & burglary damage repair in San Martin, this is how One & Only Locksmith handles it.

Most forced entries do not break the lock; they break the wood or metal around it. A kicked-in door usually splits the jamb at the strike plate, bends the strike, and sometimes cracks the door edge around the latch bore. This service repairs and reinforces that damage so the door locks properly tonight, and replaces hardware that was pried, drilled or snapped.

The technician comes to your address in San Martin, in Silicon Valley. The dispatch line at (888) 492-0666 is answered around the clock, and the dispatcher confirms the details and an ETA before anyone is sent.

• Inspection of every door and frame the intruder touched, and the ones they did not, to find the next weakest point
• Jamb repair with a reinforcement kit or steel strike reinforcer, long screws into the stud, and a box strike where the frame allows
• Wrap-around door edge plates on cracked latch or deadbolt bores so the existing door can be kept
• Latch guards and pry plates on outswing and storefront doors that were spread or jimmied
• Replacement of pried, drilled or broken deadbolts, levers, knobs and storefront deadlatches with hardware at the same or a higher grade
• Temporary securing of an opening that cannot be fully repaired on the spot, with board-up or a door contractor coordinated
• Itemized invoice describing the damage found and the work done, with photos on request for a police report or insurance claim

• Photo ID and proof you own or manage the property; tenants should have the landlord or property manager approve the repair, since it alters the building
• The police report number if one was filed, and whether officers still need the scene undisturbed before we start
• Photos of each damaged door, frame and lock from inside and outside, so the technician brings the right plates and hardware
• Door material and swing (wood, steel or fiberglass; inswing or outswing) and whether the frame is wood or steel
• Whether keys, fobs or key cards were taken, which adds a rekey or credential reset to the job
• Your insurer's claim number if you want the invoice written against it

Typically 45-120 minutes for a kicked-in residential door with a split jamb and a replacement deadbolt. Steel commercial frames, multiple doors, wrap plates on both bores, and rekeying the rest of the building push the visit toward two to three hours.

• A door slab split through the lock bore, a frame torn from the studs, broken glass or damaged drywall is contractor or glazier work. We stabilize and secure the opening and say plainly when a door or frame contractor is needed
• Steel commercial frames that were bent or peeled may need welding or frame replacement, which is outside locksmith scope
• If police asked that the scene stay untouched for prints or photos, we wait for their release; with their agreement we can secure the opening without disturbing the damage
• Repairs on rented property require the landlord's or manager's authorization; a tenant can authorize a lock change on their own unit but not structural work
• Reinforcement hardware comes in standard sizes; unusual jamb widths, arched doors and custom finishes may need a second visit
• Whether evening or weekend work carries a different rate is set by the owner's rate card and quoted on the phone

The quote is built from the number of doors, the extent of frame and door damage, the reinforcement parts used (jamb kit, wrap plate, latch guard, box strike), the grade of any replacement locks, and whether other doors get rekeyed because keys were taken. Labor time and the time of day under the owner's rate card complete the figure, in writing, before work begins.

The dispatcher gives you a range on the phone, and the technician confirms a written quote before any work starts.

Payment is by Cash, Credit Card, Debit Card, Apple Pay and Google Pay, and you receive an itemized receipt listing what was done.

• Door Armor (Armor Concepts) and StrikeMaster II jamb reinforcement kits
• Prime-Line and Don-Jo jamb repair plates and box strikes with 3-inch screws
• Don-Jo wrap-around door edge plates for cracked latch and deadbolt bores
• Don-Jo latch protectors and pry plates for outswing and storefront doors
• ANSI/BHMA Grade 1 replacement deadbolts: Schlage B60N and B660, Kwikset 980, Medeco, Mul-T-Lock
• Adams Rite MS1850 deadlocks and 4510 deadlatches for aluminum storefront doors

San Martin is served as part of Silicon Valley. ZIP codes covered: 95046. Addresses just over the line in Morgan Hill, Gilroy and Coyote are dispatched the same way. Give the dispatcher the cross street if the address is hard to find.

For break-in & burglary damage repair in San Martin, tell the dispatcher your address and what is wrong. You get an ETA before anyone is sent, a written quote before any work starts and a receipt when it is done. The line is answered around the clock.

One & Only Locksmith is bonded and insured; a certificate of insurance is available on request.